Firewood Calculator
Cords, face cords, weight, heat and pickup loads for a stack of firewood.
A cord is 128 cu ft (4 x 4 x 8 ft). A face cord is 4 x 8 ft, one piece deep: 42.7 cu ft with 16 in pieces, 1/3 of a cord.
Length of one split piece. A face cord is as deep as this.
1 for a single row of pieces.
A seasoned cord weighs about 3,440 lb; green, about 4,890 lb.
For the loads line. A load is wood level with the top of the bed.
Stack 2
Stack
About 29.7 million BTU seasoned (29.2 to 30.0) About 3 loads in an 8 ft pickup bed (half a cord each, level with the top) A load sold loose or thrown fills more space: Maine counts 180 cu ft for 12 or 16 in pieces and 195 cu ft for 24 in, Minnesota 175 cu ft thrown. Stack it to check. Most states only allow cords and parts of a cord in a sale (NIST Handbook 130); ask for the price per cord.
- Stack 1: 16 × 4 ft (length × height)
- Stack 2: 10 × 5 ft (length × height)
- Pieces: 16 in long, 1 row deep
- Species: Red oak
- Pickup: 8 ft bed
Prices & extras
Angi’s 2025 guide: about $300 a cord, $150 to $500.
A seller’s “face cord” price. It is converted to a full cord at your piece length.
Cord sizes at a glance
| Measure | Cubic feet | Cord |
|---|---|---|
| Full cord, 4 × 4 × 8 ft | 128 | 1 |
| Face cord, 24 in | 64 | 1/2 |
| Face cord, 16 in | 42.7 | 1/3 |
| Face cord, 12 in | 32 | 1/4 |
| 8 ft pickup bed, level | about 64 | about 1/2 |
| 6 ft pickup bed, level | about 43 | about 1/3 |
Stacks with 114 sq ft of face and 16 in pieces, 1 row deep, hold 152 cu ft of red oak: 1.19 cords, or 3.56 face cords, about 4,090 lb seasoned.
How to use the firewood calculator
- Measure each stack’s length and its height. Add another stack for every pile with a different size, since each stack gets its own row.
- Type the length of one piece. Most stove wood is cut between 12 and 24 in. A face cord is as deep as the pieces are long, so this changes the face cord count.
- Enter how many rows deep the stack is. Leave it at 1 for a single row of pieces. If you stacked two rows front to back, type 2.
- Pick your wood. The weight and heat come from the species.
- Pick your pickup bed to see how many loads it takes.
- Open Prices & extras and type a price per cord or per face cord if you have a quote.
How the firewood calculator works
Each stack’s length times its height is the area of its face. The depth is the piece length divided by 12, times the rows deep. Multiply the total face area by the depth to get cubic feet of stack. A cord is 128 cubic feet, so cords are the cubic feet divided by 128.
Face cords come from the face area alone, 32 square feet per row; two rows deep count twice. The calculator also prints what one face cord is of a cord at your piece length, so you can see why a 24 in face cord is not the same as a 16 in one.
Weight is cords times the pounds in a cord of that wood. The tables list seasoned and green weights separately. Heat is cords times the million BTU in a seasoned cord. Where only one source gave a heat number, as for soft maple, the calculator shows no heat line. Tons divide pounds by 2,000.
Loads divide the cords by what a pickup bed holds when it is filled level with the top: half a cord for an 8 ft bed, a third for a 6 ft bed.
Cord, face cord and rick
A cord is 128 cu ft and a face cord with 16 in pieces is 42.7 cu ft, a third of a cord; most states only allow cords and parts of a cord in a sale. The table under the calculator lists the common sizes. The stack has to be neat for the count to hold: pieces parallel and touching. A criss-cross stack looks tidy but holds less wood than a parallel stack of the same size.
A face cord has no size of its own in most places. Maine defines it as 4 ft high and 8 ft long and lets buyer and seller agree on the length of the pieces. Rick is looser still. If a seller quotes by the face cord, give the calculator the piece length and the price. It converts the price to a full cord, which is the number to compare.
Weight and heat by wood
Dense hardwood packs more wood and more heat into a cord. Seasoned hickory weighs about 3,890 lb a cord and black locust about 3,980 lb, and both give close to 28 million BTU. Ponderosa pine is about 2,290 lb at 15.6 million BTU, and cottonwood about 2,245 lb at 15.5 million. The sources differ on heat by several percent for the same wood, so the calculator shows the typical value with the range.
Moisture changes the weight a lot. Green wood can be half water, so a green cord weighs well over a thousand pounds more than a seasoned one. Heat has to boil that water off first, which is why seasoned wood is the one to burn. Seasoned means 20 percent moisture or less, and wet wood builds creosote in the chimney, which can start a chimney fire. Have the chimney inspected and cleaned each year, and keep a working carbon monoxide alarm in the house.
Buying by the cord
Ask for the price per cord and for the length of the pieces. A load sold loose or thrown is measured in more space than a stacked cord: Maine counts 180 cubic feet for a loose cord of 12 or 16 in pieces and 195 for 24 in, and Minnesota counts 175 cubic feet thrown. Stack the wood when it arrives, and measure length times height times depth. A full cord is 128 cubic feet.
Worked example
- Face area: 16 ft × 4 ft + 10 ft × 5 ft = 114 sq ft
- Depth: 16 in ÷ 12 × 1 row = 1.33 ft
- Volume: 114 sq ft × 1.3333 ft = 152 cu ft
- Cords: 152 cu ft ÷ 128 cu ft = 1.19 cords
- Face cords: 114 sq ft × 1 row ÷ 32 sq ft = 3.56; at 16 in each is 1/3 cord (42.7 cu ft)
- Weight: 1.19 cords × 3,440 lb seasoned = 4,090 lb (2.0 tons); green, 4,887 lb a cord, is 5,800 lb (2.9 tons)
- Heat: 1.19 cords × 25.0 million BTU = 29.7 million BTU
- Loads: 1.19 cords ÷ 0.5 cord per 8 ft bed, rounded up = 3
Questions people ask
How many cubic feet are in a cord of firewood?
128. A standard cord is a stack 4 ft high, 4 ft deep and 8 ft long, or any other stack where length times height times depth comes to 128 cubic feet. The wood itself is only about 65 to 90 cubic feet of that, with an average near 80. The rest is air between the pieces.
How big is a face cord?
A face cord is 4 ft high and 8 ft long, which is 32 sq ft of face, and as deep as one piece: 42.7 cubic feet, a third of a cord, with 16 in pieces. With 12 in pieces that is 32 cubic feet, a quarter of a cord. With 24 in pieces it is 64 cubic feet, half a cord. Multiplying cords by 3 only works at 16 in.
Is a rick the same as a face cord?
People often use it that way, but rick has no fixed size. It can mean any pile of wood, or a third or half of a cord. Many states only allow cords and parts of a cord in a sale, so a seller who quotes a rick or a face cord is not selling a measured amount. Ask for the price per cord and the length of the pieces.
How much does a cord of firewood weigh?
A cord of seasoned red oak weighs about 3,440 lb, ash about 3,030 lb and cottonwood about 2,245 lb, depending on the wood and how dry it is. Green red oak runs about 4,887 lb, because green wood can be 50 percent water or more by weight.
How much firewood fits in a pickup truck?
A full-size pickup with an 8 ft bed, loaded level with the top, holds about half a cord, or 64 cubic feet. A 6 ft bed barely holds a third. Wood thrown in loosely holds less, anywhere from one fifth to one half of a cord, so stack the load if you are paying by the cord.
How much does a cord of firewood cost?
Cost guides put the average near $300 a cord, with a range of $150 to $500. Prices run higher in winter and vary a lot by region and wood. The calculator leaves the price fields blank, so type your seller's price to get a total.