Units

Retaining Wall Calculator

Blocks, caps, gravel, drain pipe and cost for a block retaining wall.

Bury the first course at least 6 in, or about 10% of the wall's height, on a 6 in gravel pad. Over 3 ft ask about a permit; over 4 ft usually needs an engineer.

Face 11.63 × 4 in, 6.75 in deep.

Pavestone RockWall cap: 4.25 in of wall each, 2 in tall.

Blocks · RockWall Small

185blocks

8 courses (2 buried) × 21 per course

$492

estimate

$2.66 each

Caps

63caps

Each covers 4.25 in of wall

Order 185 blocks, 63 caps, 0.50 cu yd (0.8 tons) of #411 stone for the base and 1.63 cu yd (2.3 tons) of #57 stone behind the wall.

Drain pipe: optional under 3 ft unless your code or soil calls for it; it would be 20 ft of 4 in perforated pipe. Filter fabric, if your block maker calls for it: about 80 sq ft. Estimated cost: about $607 for blocks, #411 stone and #57 stone (pipe, fabric and delivery not included). Hired out, a block wall runs about $20 to $35 per sq ft installed: $800 to $1,400 for 40 sq ft of wall face. Not counted: geogrid, corner and step blocks, cap adhesive.

Prices & extras

5% for an easy wall, 10% is typical, up to 15% with curves.

Typical US price. Edit to yours.

#411 stone, delivered.

#57 stone, delivered.

A 20 ft wall, 2 ft above ground, in Pavestone RockWall Small, 4 in needs about 185 blocks and 63 caps with 10% extra, plus 0.50 cu yd (0.8 tons) of base stone and 1.63 cu yd (2.3 tons) of drainage stone.

How to use the retaining wall calculator

  1. Measure each wall’s length and its height above ground, the part you can see. Add another wall for every section with a different height, since each wall gets its own courses. Call 811 before you dig the trench.
  2. Pick your block. The list has common block systems with their real face sizes. Pick Custom size to type the face width, face height and depth of any other block.
  3. Choose whether the wall gets caps. A cap takes a few inches off the height the blocks need to cover.
  4. Open Prices & extras to change the extra for cuts and breakage, the block and cap prices, and the stone prices.
  5. Print the order slip and take it to the yard. It lists every material.

How the retaining wall calculator works

Blocks come first. The calculator counts the courses above ground by dividing the height above ground, less the cap, by the block height. It then adds the buried courses: at least 6 inches, or about 10 percent of the height on taller walls, rounded up to whole blocks. Blocks per course is the wall length divided by the block’s face width, rounded up. The extra covers cuts, wall ends and breakage.

Caps are counted by the length of wall each one covers. The RockWall, Versa-Lok and Allan Block caps are in the list. For other blocks the calculator counts one cap per block width, so check the length of the cap you buy.

The stone comes from the makers’ install guides. The base is 6 inches of compacted #411 stone, twice as wide as the block is deep, plus 20 percent for compaction. The drainage zone is 12 inches of #57 stone behind the wall, as high as the wall stands above ground, plus 10 percent. Weights use the same densities as the gravel calculator and the cubic yards to tons converter.

A 4 inch perforated drain pipe runs the length of any wall over 3 feet. It is recommended there and required over 4 feet. Filter fabric, if your block maker’s guide calls for it, wraps the stone: the wall length times its height plus 2 feet.

Walls over 3 feet may need a permit, and walls over 4 feet usually need an engineer and geogrid. The calculator still answers, but it counts only block, caps, stone and pipe. Geogrid, corner and step blocks and cap adhesive are not included.

Costs multiply each count by a price you can edit. Block prices are filled in only where two sources agree, which today is the RockWall blocks; for any other block, type your dealer’s price. The stone prices are the typical delivered prices the gravel calculator uses.

Block sizes

The blocks run from the RockWall Small at 11.63 × 4 × 6.75 in to the Compac III and Diamond Pro at 18 × 8 × 12 in. Face is the side that shows; depth runs back into the hill. These are the real sizes the calculator uses, in inches: face width, face height, depth. RockWall is made by Pavestone, AB Classic by Allan Block, Compac III by Keystone and Diamond Pro by Belgard.

Block Width × height × depth Cap length
RockWall Small 11.63 × 4 × 6.75 4.25
RockWall Large 17.44 × 6 × 7 4.25
BroadStone 18 × 6 × 12 none
AB Classic 17 5/8 × 7 5/8 × 11 5/8 18
Versa-Lok 16 × 6 × 12 14
Compac III 18 × 8 × 12 none
Diamond Pro 18 × 8 × 12 none

None means no cap size is on file for that block, so the calculator counts one cap per block width.

What changes as the wall gets taller

Heights are above ground, on level ground with good soil and nothing heavy above the wall. The first course is buried 6 in on walls up to 4 ft and 7 to 9 in at 6 ft. The base stays 6 in thick, and 24 in wide for a block 12 in deep.

Height Drain pipe Permit or engineer
2 ft Optional RockWall blocks are listed up to 2 ft
3 ft Advised over 3 ft Some towns want a permit
4 ft Required over 4 ft Versa-Lok Standard tops out here; above it, get an engineer
6 ft Always, outlet every 50 ft Geogrid and an engineer

Worked example

  1. Wall: 20 ft long × 2 ft above ground
  2. Courses above ground: (24 in − 2 in cap) ÷ 4 in block height = 5.5, round up to 6
  3. Buried courses: the larger of 6 in or 10% of 24 in = 6 in ÷ 4 in = 1.5, round up to 2
  4. Blocks per course: 240 in ÷ 11.63 in face = 20.64, round up to 21
  5. Blocks: (6 + 2) courses × 21 = 168; extra for cuts: 168 × 1.10 = 184.8, round up to 185 blocks
  6. Caps: 240 in ÷ 4.25 in = 56.47, round up to 57; extra: 57 × 1.10 = 62.7, round up to 63 caps
  7. Base stone: 20 ft × 13.5 in wide (twice the 6.75 in block depth) × 6 in thick = 11.25 cu ft; plus 20% for compaction = 13.5 cu ft = 0.50 cu yd, or 0.75 tons of #411 stone at 1.5 tons per cu yd
  8. Drainage stone: 20 ft × 12 in wide × 2 ft high = 40 cu ft; plus 10% = 44 cu ft = 1.63 cu yd, or 2.28 tons of #57 stone at 1.4 tons per cu yd
  9. Filter fabric (optional): 20 ft × (2 ft + 2 ft overlap) = 80 sq ft
  10. Cost: blocks 185 × $2.66 = $492; #411 stone 0.75 tons × $32.00 = $24; #57 stone 2.28 tons × $40.00 = $91

Questions people ask

How many retaining wall blocks do I need?

A block that covers 1 sq ft of face, like the Keystone Compac III or the Belgard Diamond Pro, takes about 1 block per sq ft, plus 5 to 15 percent for cuts and breakage, 10 percent is typical. To count them, divide the wall length by the block's face width and round up to get blocks per course. Multiply by the number of courses: the height above ground divided by the block height, plus the buried course. Caps are counted separately: one for every 4.25 inches of wall for the RockWall cap.

How much gravel goes behind a retaining wall?

A column of clean 3/4 inch angular stone such as #57, at least 12 inches thick, for the full height above ground. Under the wall goes a base of #411 or another compactable stone, 6 inches thick and twice as wide as the block is deep: 24 inches for a block 12 inches deep. Add about 10 percent to the drainage stone and about 20 percent to the base for compaction.

How deep should the first course be buried?

At least 6 inches, and about 10 percent of the height above ground on taller walls, according to Belgard, Allan Block, Versa-Lok and Pavestone. Keystone asks for 1 inch for every 8 inches of height, or one whole block, whichever is more. The calculator buries whole courses, so an 8 inch block buries one course on most garden walls and a 4 inch block buries two.

How tall can a block retaining wall be without an engineer?

Many garden walls stop at 3 to 4 feet. Some towns want a permit over 3 feet, and building codes send walls over 4 feet, or over 2 feet with a driveway, fence or slope above, to an engineer. Taller walls usually need geogrid too. The calculator warns above 3 and 4 feet but still counts the materials, so check your block maker's own limit and ask your building department.

Do I need a drain pipe behind a retaining wall?

Versa-Lok recommends a perforated pipe for walls over 3 feet, and Allan Block requires one over 4 feet or in silty or clay soil. Lay 4 inch perforated pipe along the base of the drainage stone, run it out to daylight and add an outlet at least every 50 feet. The pipe is as long as the wall.

How much does a retaining wall cost?

Hired out, concrete and segmental block walls run about $20 to $35 per square foot of face, timber $15 to $25 and poured concrete $30 to $45. Materials alone for a block wall run about $6 to $12 per square foot of face. Permits usually cost $50 to $450, and a wall over 4 feet needs an engineer's design on top of that.

Related calculators