Board Foot Calculator
Board feet, cubic meters and cost for a list of boards.
Board feet = thickness (in) x width (in) x length (ft) / 12. Lumber yards count a 2x4 as 2 x 4 in, so an 8 ft 2x4 is 5.33 BF.
Hardwood is billed at its rough thickness (4/4 = 1 in) and real width, even when the yard planes it thinner.
Board 1
8.33 BF each · 41.67 BF
Sellers suggest about 10-15% for boards already surfaced to size (J. Gibson McIlvain) and 40-60% when cutting small parts from rough hardwood (AJW Specialty Lumber).
Planed boards are thinner (5/4 is about 1 1/16 in surfaced) but still billed at the rough thickness.
Check this size
- Lumber: Hardwood (4/4, 5/4, 8/4...)
- Board 1: 5/4 x 10 in x 8 ft, quantity 5
Board feet in common boards
| Board | Board feet |
|---|---|
| 1x4 softwood, 8 ft | 2.67 |
| 1x6 softwood, 8 ft | 4.00 |
| 2x4 softwood, 8 ft | 5.33 |
| 2x6 softwood, 12 ft | 12.00 |
| 2x8 softwood, 12 ft | 16.00 |
| 2x10 softwood, 12 ft | 20.00 |
| 4/4 hardwood, 6 in wide, 8 ft | 4.00 |
| 8/4 hardwood, 8 in wide, 8 ft | 10.67 |
Hardwood thickness: billed and planed
| Size | Rough, in | Planed, in |
|---|---|---|
| 4/4 | 1 | 13/16 |
| 5/4 | 1.25 | 1 1/16 |
| 6/4 | 1.5 | 1 5/16 |
| 8/4 | 2 | 1 3/4 |
| 10/4 | 2.5 | 2 1/4 |
| 12/4 | 3 | 2 3/4 |
| 16/4 | 4 | 3 3/4 |
5 boards add up to 41.67 board feet, which is 3.47 cu ft or 0.098 m³.
How to use the board foot calculator
- Pick the lumber type. Softwood is framing lumber sold by name size, such as 2x4 and 2x6. The stud calculator counts the 2x4s a wall needs. Hardwood is sold in quarters of an inch and by its real width. Exact size is for any board when you know the measurements.
- For each board, choose or type the size, then the length and how many you need. Hardwood and exact boards also take a width.
- Press Add a board for each different size, up to ten. Remove a board you no longer need.
- Add a waste percentage if you want to buy extra, and a price per board foot if you want a cost. Both can stay blank.
- Read the board feet, the amount to buy and the cubic meters. Print the slip or copy the link.
What is a board foot?
A board foot is a piece of wood 1 ft long, 1 ft wide and 1 in thick. That is 144 cubic inches. To measure board feet, take the thickness and width in inches and the length in feet.
How the board foot calculator works
For one board the calculator multiplies thickness in inches, width in inches and length in feet, divides by 12 and multiplies by the quantity. The rows are added together before anything is rounded, then shown to two decimals.
Softwood. Yards count planed softwood at its name size and the real length. A 2x4 counts as 2 x 4 in, so each foot of it is 0.67 board foot, even though the wood is smaller than that. The result adds a line with the board feet of the wood itself, so you can see the gap between what you are billed and what you get.
Hardwood. Hardwood is counted at its rough thickness, set by the quarter: 4/4 is 1 in and 8/4 is 2 in. The count stays at the rough thickness even when you buy it planed, which is why surfaced boards look thinner than the number says. Width is the real width, so you type it.
Exact size. Whatever thickness and width you type are used as they are. If they match a real softwood size, such as 1 1/2 x 3 1/2 in, the calculator warns you, because a yard would bill that board by its name size instead.
Waste and price. Both start blank. Sellers suggest a low waste figure for boards already surfaced to size and a much higher one when you cut small parts from rough hardwood, and the hint under the field names both. The price is per board foot, applied to the amount you buy.
Board feet by common size
An 8 ft 2x4 is 5.33 board feet and a 1 x 6 x 8 ft board is 4. The table below shows board feet for common boards. A short extra table lists the hardwood quarters and what each one planes down to.
What a board foot tally does not cover: log scales, yard tally rules
Log scales such as Doyle, Scribner and International measure board feet of lumber a log may yield, which is a different job. Yard tally rules, kiln shrink, and lumber priced by the linear foot or square foot are also not counted here. Ask your seller how they tally.
Worked example
- Board 1 (5/4): 1.25 in × 10 in × 8 ft ÷ 12 = 8.33 BF each; × 5 = 41.67 BF
- Cubic feet: 41.67 BF ÷ 12 = 3.47 cu ft
- Cubic metres: 41.67 BF × 0.002359737 = 0.098 m³
- To buy: 41.67 BF, with no waste added
Questions people ask
How do you measure and calculate board feet?
Multiply thickness in inches by width in inches by length in feet, then divide by 12. A 1 x 6 x 8 ft board is 1 x 6 x 8 / 12 = 4 board feet. Add the boards together before you round.
Do I use nominal or actual size?
Softwood such as a 2x4 is counted at its name size, 2 x 4 in, even though it measures 1 1/2 x 3 1/2 in. Hardwood is counted at its rough thickness in quarters, even when it is sold planed, with the real width.
How many board feet are in a 2x4?
Each linear foot of 2x4 is 2 x 4 / 12, or 0.67 board foot. An 8 ft 2x4 is 5.33 board feet. The same board is only about 3.5 board feet if you count its actual size, so a yard billing by name size looks like it over-counts.
What does 4/4 mean on hardwood?
It is the rough thickness in quarters of an inch: 4/4 is 1 in, 5/4 is 1 1/4 in, 8/4 is 2 in. A 4/4 board planed smooth on both sides is about 13/16 in thick but is still sold as 4/4.
Why is the yard's count different from mine?
AHEC's own example, a 2 x 6 1/4 in x 8 ft board, is 8.33 board feet exactly but tallies as 8, because hardwood yards often round the width to the nearest inch and the length down to a whole foot. Ask the seller how they count.
How many board feet are in a cubic meter?
About 424. One board foot is 144 cubic inches, or 0.002359737 cubic meters. The calculator shows cubic meters and cubic feet under the board feet.