Siding Calculator
Squares, cartons or planks, vinyl trim and cost for a house.
An 8 1/4 in fiber-cement plank shows 7 in, so a 12 ft plank covers 7 sq ft: 14.3 planks per 100 sq ft. A vinyl carton covers 200 sq ft.
Sold in cartons of panels. Corner posts, starter strip and J-channel are counted too.
Leave normal windows and entry doors in: the extra covers the cutting waste. Blank = 0.
Wall 2
Wall 3
Wall
Installed: about $6,665 ($3,999 to $10,664), $500 a square. J-channel up the gable rakes is not counted.
- Wall 1: 136 × 9 ft
- Wall 2: triangle, base 28 ft, height 7 ft
- Wall 3: triangle, base 28 ft, height 7 ft
- Siding: Vinyl
- Garage doors, patio doors and big windows: 87 sq ft
- Waste: 10%
- Cartons: 2 squares each
- Corners: 4 at 9 ft, 12 ft posts
- Windows: 12, doors: 3
- Installed price: $5 per sq ft
| Siding | Shows | Covers | Per 100 sq ft |
|---|---|---|---|
| Vinyl, carton | Varies | 200 sq ft | 0.5 carton |
| Fiber cement 6 1/4 in, 12 ft | 5 in | 5.00 sq ft | 20 planks |
| Fiber cement 7 1/4 in, 12 ft | 6 in | 6.00 sq ft | 16.7 planks |
| Fiber cement 8 1/4 in, 12 ft | 7 in | 7.00 sq ft | 14.3 planks |
| Fiber cement 9 1/4 in, 12 ft | 8 in | 8.00 sq ft | 12.5 planks |
| Engineered wood 8 in, 16 ft | 7 in | 9.33 sq ft | 10.7 pieces |
| Cedar bevel 4 in | 2 1/2 in | 0.21 sq ft per ft | 480 ft, 160 board ft |
| Cedar bevel 6 in | 4 1/2 in | 0.38 sq ft per ft | 267 ft, 133 board ft |
| Cedar bevel 8 in | 6 1/4 in | 0.52 sq ft per ft | 192 ft, 128 board ft |
| Cedar bevel 10 in | 8 1/4 in | 0.69 sq ft per ft | 145 ft, 121 board ft |
Prices & extras
Gable-heavy houses waste more; one wood dealer says 15 to 25% on gables.
Most cartons hold 2 squares (200 sq ft). Check the label.
Each takes one corner post.
From the base of the wall to the eave.
A corner taller than one post takes two.
2 pieces of J-channel each.
1.5 pieces of J-channel each.
Labor and material: $3 to $8 per sq ft for vinyl siding.
1,333 sq ft of wall is 13.33 squares. With 10% extra, order 14.66 squares of vinyl siding: 8 cartons, 4 corner posts, 12 starter strips and 40 pieces of J-channel.
How to use the siding calculator
- Pick the siding: vinyl, fiber cement lap, engineered wood lap or cedar bevel. For fiber cement and cedar, pick the board size.
- Add one row for the length and height of your walls. Walls of the same height can go in as one row, with their lengths added end to end. Add a gable row for each triangle, with the width and height of its base.
- Type the garage doors, patio doors and big windows as one number. Leave ordinary windows and entry doors in.
- Open Prices & extras to change the waste, the vinyl corners, windows and doors, and your installed price.
- Read the order line, or print the slip and take it to the supplier.
How the siding calculator works
Wall area. Each wall is its length times its height. Each gable is half its width times its height. The calculator adds them, subtracts the garage doors, patio doors and big windows, and shows the squares. One square is 100 sq ft.
Waste. The waste is added to the net wall area once, then rounded up once at the end: 10 percent unless you change it. It covers cuts, mistakes and the cut-up area around windows.
Vinyl. Squares to order, divided by the squares in a carton, rounded up. Most cartons hold 2 squares. Corner posts are the number of corners times the posts one corner needs, because a corner taller than the post takes two. The starter strip runs along the base of the walls and one run of J-channel along their tops, so both use the added wall lengths, not the distance around the house. J-channel is also 2 pieces per window and 1 1/2 per door. All trim comes in 12 ft pieces.
Fiber cement and engineered wood. A plank covers its length times the part you see, called the exposure. For fiber cement the exposure is the width minus the 1 1/4 in head lap, so an 8 1/4 in plank shows 7 in. The count is the order area divided by the area one plank covers, rounded up.
Cedar bevel. Bevel siding is sold by the linear foot or the board foot. Linear feet are the order area times 12, divided by the exposure. Board feet use the nominal width in place of 12. The 8 and 10 in sizes use the narrower dressed widths from the Western Wood Products Association, so they ask for a little more wood. Mills vary.
Cost. The net wall area times a 2026 installed price per square foot, with a low to high range for the siding you picked. It includes labor and material, and shows the price for one square too.
What the siding count leaves out: soffit, fascia, wrap, nails
Nails, J-channel up the gable rakes, soffit, fascia, house wrap, trim boards, shingles, shakes and paint are not counted. Board and batten has its own calculator. For the studs behind the siding, use the stud calculator. Wall insulation is not counted: with the walls open, the insulation calculator counts batts by stud spacing. Add them to your list from your plans. Rakes need the roof pitch, which this tool does not ask for; the roof pitch calculator finds it. Check the label or the maker’s page for the carton size and the exposure of the exact product you buy.
Worked example
- Wall 1: 136 ft × 9 ft = 1,224 sq ft
- Gable 2: ½ × 28 ft × 7 ft = 98 sq ft
- Gable 3: ½ × 28 ft × 7 ft = 98 sq ft
- Total wall area: 1,420 sq ft
- Garage doors, patio doors and big windows: 1,420 − 87 = 1,333 sq ft, or 13.33 squares
- With 10% extra: 1,333 × 1.10 = 1,466.3 sq ft, or 14.66 squares
- Cartons: 14.66 squares ÷ 2 per carton = 7.33, round up to 8 cartons
- Corner posts: 4 corners × 1 post of 12 ft for a 9 ft corner = 4
- Starter strip: wall bases 136 ft ÷ 12 ft = 11.33, round up to 12
- J-channel: 12 windows × 2 + 3 doors × 1.5 + 11.33 along the wall tops = 39.83, round up to 40
- Cost: 1,333 sq ft × $5.00 = $6,665; at the type's range $3,999 to $10,664
Questions people ask
How many squares of siding do I need?
A square is 100 sq ft of wall. Add up every wall and gable, subtract garage doors and big windows, divide by 100 and add about 10 percent for waste. The house in the example has 1,333 sq ft of wall, which is 13.33 squares, and 14.66 squares with 10 percent extra. CertainTeed and Hansons both suggest the 10 percent.
How many squares are in a box of vinyl siding?
Most cartons hold 2 squares of wall, say Owens Corning and PJ Fitzpatrick. Cartons differ by profile and maker, so read the label and change the squares per carton in Prices & extras.
Do I subtract windows and doors from siding?
Subtract garage doors, patio doors and large picture windows. Many installers leave ordinary windows and entry doors in the total, because that area pays for the cutting waste around them. The sources disagree: Kaycan subtracts every opening and CertainTeed subtracts none, so this calculator takes the middle rule from Progressive Foam, Hansons and Millard Lumber.
How much waste should I add for siding?
Plan on 10 percent for a simple house, 5 to 15 percent in the range the sources give. Gable ends cut more. One wood dealer quotes 15 to 25 percent on gables, so a house with many gables can use a higher number in Prices & extras.
How many HardiePlank boards cover a square?
An 8 1/4 in plank is hung with 7 in showing, because the lap siding needs a head lap of at least 1 1/4 in (the maker's ICC-ES evaluation report). A 12 ft plank then covers 7 sq ft of wall, not the 8.25 sq ft of board face a store listing may show. The table under the result lists every width.
How many outside corner posts do I need?
One post per corner, and each is a 12 ft piece. A corner taller than 12 ft takes two posts, which PJ Fitzpatrick and Progressive Foam both say. Enter the corner height in Prices & extras and the calculator counts them.