Units

Pond Calculator

The liner to buy, underlayment, gallons and pump size for a garden pond.

Liner = pond length + 2 x max depth + 2 ft: a 10 x 8 ft pond 2 ft deep needs a 16 x 14 ft sheet. A cubic foot holds 7.48 gallons.

Shape of the pond

The deepest spot sizes the liner. For an odd shape, enter the longest length and widest width above.

Measure in 4 or more spots and average. It sets the gallons, not the liner.

1 ft minimum, 1.5 for waterfalls or odd shapes, 2 ft for koi.

How often the pump moves the whole pond: once an hour with fish, every 2 hours with plants.

Liner, ft

15 × 20

Needed 16 × 14 ft; next size up 15 × 25

Water

898gallons

3,398 L at 1.5 ft average depth

Pump

898GPH

Whole pond once an hour; 449 GPH for once every 2 hours

Buy a 15 × 20 ft liner, the same size of underlayment and a pump that moves 898 GPH.

Underlayment: 300 sq ft, the same size as the liner. Liner about $300 ($225 to $600), underlayment about $99 ($75 to $159). Koi ponds need 3 ft or more. Measure the dug hole before you order. Pump flow drops as you lift water higher; check the pump's chart.

Prices & extras

45 mil EPDM about $0.75 to $2.00 per sq ft.

Usually $0.25 to $0.53 per sq ft.

Common pond sizes and the liner to buy

Sizes in feet: length × width × maximum depth, with a 1 ft overlap on each side. For another size, use the calculator above.

Liner needed, and the boxed sheet to buy, in feet.
PondNeededBuy
4 × 6 × 210 × 1210 × 15
6 × 8 × 212 × 1412 × 15
8 × 11 × 214 × 1715 × 20
10 × 14 × 216 × 2020 × 20
11 × 16 × 217 × 2220 × 25
12 × 16 × 320 × 2420 × 25

A 10 by 8 ft pond needs a 15 × 20 ft liner and the same size of underlayment. It holds about 898 gallons, so plan on a pump of about 898 GPH.

How to use the pond calculator

  1. Pick rectangle or round, then type the pond’s length and width, or its diameter. For an odd shape, type the longest length and the widest width, measured at right angles.
  2. Call 811 before you dig, then type the maximum depth, the deepest spot. The liner is sized on this number.
  3. Type the average depth. Measure in four or more places and average them. It sets the gallons, not the liner.
  4. Choose the overlap per side and how often the pump should move the whole pond.
  5. Read the order line. Open Prices & extras to use your own liner and underlayment prices. Add another pond if you are building more than one.

How the pond calculator works

Liner. Each side of the sheet is the pond’s size on that side, plus twice the maximum depth, plus twice the overlap. Depth counts twice because the liner runs down one wall and up the other. The overlap is the extra that lies flat on the bank under the edging stones. Each side is rounded up to a whole foot, then matched to the smallest boxed 45 mil EPDM sheet that covers both sides. A sheet can be turned sideways, so a 16 by 14 ft need fits a 15 by 20 ft liner. If no boxed size is large enough, you need a custom roll, which makers cut up to 50 ft wide.

Underlayment. It is bought in the same size as the liner. The calculator uses the area of the sheet you buy, not the area of the hole.

Water. The water surface times the average depth gives cubic feet. A cubic foot holds 7.48 US gallons or 28.3168 litres. Only the average depth is used here, because a pond slopes and the deepest spot holds more than the rest.

Pump. Gallons divided by the hours you want for one full turn gives gallons per hour. Once an hour suits fish. Once every 2 hours is the slowest turnover makers suggest, for a planted pond with few fish.

Cost. The area of the sheets you buy times a price per square foot, shown as a range for 45 mil EPDM. Installation and the pump itself are not priced.

Pond liner quick facts

What Value
Liner thickness for backyard ponds 45 mil EPDM
Overlap per side 1 ft minimum, 1.5 ft for waterfalls or odd shapes, 2 ft for koi
Depth used for the liner Maximum depth, counted twice
Depth used for gallons Average depth
Gallons per cubic foot 7.48
Underlayment size Same as the liner
Pump turnover Once an hour with fish, once every 2 hours with plants
Minimum depth for koi 3 ft

Some towns require a fence or a safety cover around a garden pond, so ask your building department before you dig.

What the pond estimate leaves out: filters, rock, waterfalls

The pond calculator sizes the liner, underlayment, water and pump flow. It does not size rock or edging, filters, UV clarifiers, waterfalls or streams, or the pump’s flow at your height. Measure the dug hole before you order.

Worked example

  1. Water surface: 10 ft × 8 ft = 80 sq ft
  2. Liner length side: 10 ft + 2 × 2 ft depth + 2 × 1 ft overlap = 16 ft
  3. Liner width side: 8 ft + 2 × 2 ft depth + 2 × 1 ft overlap = 14 ft
  4. Boxed sheet: the smallest that covers 16 × 14 ft is 15 × 20 ft, 300 sq ft
  5. Water: 80 sq ft × 1.5 ft average depth = 120 cu ft × 7.48 = 898 gallons
  6. Pump: 898 gallons ÷ 1 hour = 898 GPH
  7. Liner cost: 300 sq ft × $1.00 = $300

Questions people ask

What size pond liner do I need?

A 10 by 8 ft pond that is 2 ft deep needs a 16 by 14 ft sheet with 1 ft of overlap per side: add the pond's length, twice its maximum depth and twice the overlap, then do the same for the width. Liners come in boxed sizes, so round up: that pond takes a 15 by 20 ft liner, which fits turned sideways.

How do I find my pond volume in gallons?

Multiply the water surface in square feet by the average depth in feet, then by 7.48. A 10 by 8 ft pond with a 1.5 ft average depth holds about 898 gallons. Measure the depth in four or more places and average it, because most ponds slope.

How big a pump do I need for my pond?

Move the whole pond through the pump once an hour if you keep fish or koi, so an 898 gallon pond needs about 898 GPH. A planted pond with few fish can turn over once every 2 hours, which halves the flow. Pump flow falls as you lift water higher, so check the maker's chart at your height. Plug the pump into a GFCI outlet, which cuts power if current leaks to the water.

Do I use maximum or average depth for the liner?

Maximum depth. The liner has to run down one side to the deepest point and up the other, which is why depth counts twice. Average depth leaves the sheet short at the deep end. Use the average only for gallons.

Do I need underlayment under a pond liner?

On native soil, yes. It protects the liner from stones and roots and is the same size as the liner. It usually adds $0.25 to $0.53 per square foot, and the calculator prices it for you.

How deep should a koi pond be?

At least 3 ft, and the calculator warns when your maximum depth is less. Koi also do better with a 2 ft overlap on each side, so pick that in the overlap list.

Related calculators