Units

Brick Calculator

Bricks, mortar and cost for a brick wall.

Modular brick with a 3/8 in joint takes 6.75 per sq ft: 675 per 100 sq ft, about 709 with 5% for waste.

How you measure the wall

3-5/8 × 2-1/4 × 7-5/8 in. Check your maker’s sizes.

Openings in the wall. Blank = 0.

3/8 in is the usual joint. The brick count is the same for both; the mortar is not.

One brick thick, like a veneer or a garden wall.

About 35 bricks per bag, before waste.

Bricks · Modular

1,049bricks

999 before 5% extra, for 148 sq ft of wall

$577

estimate

$0.55 each

Mortar mix · 80 lb

32bags

About 35 bricks per bag

$336

estimate

Order 1,049 bricks and 32 bags of 80 lb mortar mix.

Other mortar route: 8 bags of masonry cement and 1,920 lb of sand (about $136). Mortar in the wall: about 8.06 cu ft (theory, before waste). This estimates quantities only; check your local building code for structural walls.

Prices & extras

BIA adds at least 5%. Use more with many cuts.

For waste and spills. 10% matches the masons’ rule of thumb.

Typical US price. Edit to yours. Common clay brick; face and specialty bricks cost more.

A 20 by 8 ft wall needs about 1,049 modular bricks with 5% extra, plus 32 bags of 80 lb mortar mix.

How to use the brick calculator

  1. Measure the wall’s length and height, or type its area if you already know it. Add another wall for each side of a garden bed, planter or enclosure.
  2. Type the area of any doors and windows so you don’t buy bricks for the holes.
  3. Pick the brick size. Modular is the common US size; check the size printed on your supplier’s sheet, because makers differ by a fraction of an inch.
  4. Pick the joint and the number of layers. A single layer is a veneer or a low garden wall; a double layer is a solid wall two bricks thick.
  5. Pick the mortar you will buy, then open Prices & extras to set the extra for breakage, the extra mortar and your local prices.

How the brick calculator works

Brick tables count bricks per square foot of wall face because bricks are laid to a fixed course height. Modular brick lays 6.75 to the square foot; dividing 144 by the face and joint gives 6.86. The calculator takes the net wall area (length times height, minus openings), multiplies it by the count for your brick, doubles it for two layers, adds the extra for broken and cut bricks and rounds up. The Brick Industry Association adds at least 5 percent; walls with many cuts need more.

Mortar is worked out in two steps. First the calculator finds the mortar in the wall from the brick’s real size and joint: thickness times joint times length plus joint plus height, which agrees with the BIA and Glen-Gery tables to within about 1 percent. Then it scales the makers’ bricks-per-bag figures, which are quoted for a modular brick with a 3/8 in joint, to your brick and joint. Bags come from the unrounded brick count, so the extra is not counted twice, plus 10 percent for waste.

Both mortar routes are always shown. A premixed 80 lb bag already holds sand and lays about 35 bricks. A 70 lb bag of masonry cement lays about 144 bricks once you mix in 240 lb of sand, so you buy sand too. Prices are typical US figures that you can edit.

This estimates quantities only; check your local building code for structural walls. The calculator leaves out filling the gap between two layers, header courses in special bonds, hollow bricks, thin brick and patio brick (use the paver page for those).

Brick sizes and counts

Modular brick takes 6.75 bricks per square foot of wall, and 1,000 of them take 8.06 cu ft of mortar. Counts are for one layer of brick, from BIA Technical Note 10 and Glen-Gery.

Brick Per sq ft Mortar, cu ft per 1,000
Modular 6.75 8.06
Standard 6.55 8.36
Queen 5.63 7
King 4.55 10.03
Norman 4.5 11.21
Utility 3 12.29
Engineer modular 5.63 8.46

Sizes in inches, thickness by height by length:

  • Modular 3 5/8 by 2 1/4 by 7 5/8, standard 3 5/8 by 2 1/4 by 8, queen 3 by 2 3/4 by 7 5/8.
  • King 3 5/8 by 2 3/4 by 9 5/8, Norman 3 5/8 by 2 1/4 by 11 5/8, utility 3 5/8 by 3 5/8 by 11 5/8.
  • Engineer modular 3 5/8 by 2 3/4 by 7 5/8.

Mortar is for a 3/8 in joint, worked out from the brick’s size, before waste.

Mortar bags per brick

An 80 lb bag of premixed mortar lays 35 to 37 standard bricks, and a 70 lb bag of masonry cement lays 144 to 150, as the makers quote.

Mortar Bag Lays
Premixed mortar 80 lb 35 to 37 bricks
Masonry cement 70 lb 144 to 150 bricks

Premix already has the sand in the bag. Masonry cement is mixed with 240 lb of mason’s sand, 1 part cement to 3 parts sand by volume. For stone veneer, tuckpointing or a cement, lime and sand mix, use the mortar calculator.

The calculator uses the low end for premix, 35, so you do not run short, and 144 for masonry cement. Waste is added on top, and the scale for your brick and joint is applied before the bags are counted.

Common mistakes

  • Dividing 144 by the brick face and joint gives 6.86 for modular brick. Real walls are laid to an 8 in course height for three courses, so use the 6.75 from the tables.
  • Skipping the openings buys bricks for the holes; subtracting too much leaves you short at the corners and around windows, where cuts are highest.
  • Buying only the net count. Cuts and breakage always cost bricks, and a pallet that runs out mid-wall may not match the next batch.
  • Counting mortar from cubic feet alone. Bags are what you buy, and makers’ bag yields are the better guide.

Worked example

  1. Wall area: 20 ft × 8 ft = 160 sq ft
  2. Doors and windows: 160 − 12 = 148 sq ft
  3. Bricks: 148 sq ft × 6.75 bricks per sq ft = 999 bricks
  4. Extra for breakage: 999 × 1.05 = 1,048.95, round up to 1,049 bricks
  5. Mortar per 1,000 bricks: 8.06 cu ft with a 3/8 in joint, 1.000 times the modular brick
  6. Mortar bags: 999 × 1.000 ÷ 35 bricks per bag × 1.10 = 31.40, round up to 32 bags of 80 lb mortar mix
  7. Mortar in the wall: 999 × 8.06 ÷ 1,000 = 8.06 cu ft (theory, before waste)
  8. Cost: bricks 1,049 × $0.55 = $577; mortar 32 × $10.50 = $336

Questions people ask

How many bricks per square foot?

About 6.75 for modular brick (3 5/8 by 2 1/4 by 7 5/8 in) with a 3/8 in joint. Larger bricks need fewer: Norman takes 4.5 and utility 3. The count is the same for a 3/8 and a 1/2 in joint.

How many extra bricks should I buy?

The Brick Industry Association says to add at least 5 percent to the net count for breakage and cuts, and more where there are many cuts, such as around windows and corners. For the 148 sq ft example wall that is 1,049 bricks instead of 999.

How many bricks does a bag of mortar lay?

An 80 lb bag of premixed mortar lays about 35 to 37 standard bricks. A 70 lb bag of masonry cement mixed with 240 lb of sand lays about 144 to 150. Makers' figures do not allow for waste and spillage, so the calculator adds 10 percent.

How much mortar do 1,000 bricks take?

In the wall, modular brick with a 3/8 in joint holds about 8.1 cu ft of mortar per 1,000 bricks. Masons plan on about 8 bags of masonry cement for 1,000 modular bricks, because mortar is also lost on the board, the trowel and the ground.

Do I double the bricks for a double-wythe wall?

Yes. Each layer is a full face of brick, so a wall two bricks thick takes twice the bricks and twice the mortar for the bed and head joints. Mortar for any gap between the two layers is extra and is not counted here.

What mortar joint should I use?

3/8 in is the usual joint for modular brick. A 1/2 in joint takes about a third more mortar per brick but the same number of bricks, since the tables count both the same.

Related calculators